I am attempting to restore a Philco 90. The two Mershon filter capacitors were removed in prior servicing. Fortunately I have a couple of the 6mfd copper Mershon capacitors in stock. But I am missing some of the hardware. If anyone has any of these parts in stock, I will gladly pay well including shipping and handling! So PLEASE check your junk boxes or junker chassis. I believe that these parts are used on the model 70 as well. The following are needed:
1. Two positive terminal lugs (I have the nuts) - probably looks like a ground lug.
2. One fiber insulator (rough sketch below) - the small hole has an eyelet, I think.
3. One metal ground lug
The metal ground lug would fit around the capacitor base and thus have a hole about 7/8" in diameter. An extension then passes over to the eyeletted hole in the insulator, bends downward and then through the chassis. Thanks for any help! I pay WELL - name your price including mailing to 37725 USA.