Has anybody got one of these that they can part with? The transformer off of a 19A1 chassis should also work. I'll take a junk 19A1 or 17T1 chassis, if there is one of these transformers on it. I doubt that there is anything that would work as a substitute, but I'm open to suggestions. The old one was working until the horizontal sweep went ragged and then went flatline. I tried to repair the transformer, but now I hear a high frequency sizzle, and see a very ragged horizontal sweep. The transformer was open, but I spliced the broken wires a couple of times. The first time it worked fine for about 10 minutes. <P>Ken<P>------------------<BR>