Post subject: Building a new silvertone cabinet need bezel measurments
Posted: Feb Sun 19, 2012 8:27 pm
Member
Joined: May Sun 08, 2011 8:52 pm Posts: 168 Location: Bay City Mi
Well , I decided to try making another radio cabinet. This time I have a silvertone chassis that I restored , but no case for it . I think I will try the model 4663 as that one has more straight lines . But my one draw back to this project is , I do not have the bezel for this radio, I guess I will try to make it out of wood , but I need the dimensions for it . Does anyone out there have a silvertone with this bezel that could measure the inner and outer dimensions and PM them to me would be great Thanks
Attachments:
silvertone dial.jpg [ 6.98 KiB | Viewed 242 times ]
Post subject: Re: Building a new silvertone cabinet need bezel measurments
Posted: Feb Mon 20, 2012 2:01 am
Member
Joined: Oct Sat 30, 2010 9:59 pm Posts: 251 Location: Riverside, Ca.
This photo is from a while back, and the bezel is pretty warped. It's on the radio now, and I can't remove it due to the methods I went through to "unwarp" it. But here are the dimensions I got:
Keep in mind it's probably warped here and there, and the dimensions may be a scoosh off because of all the rounded corners...
