Does anyone have a decent and readable copy of the schematic for an RCA model 128 tombstone radio they could e-mail me? Though I appreciate the fine website "Nostalgiaair", their version of the schematic is too compressed and capacitor values unreadable when enlarged. Of course, RCA maintained proprietary control by marking all the capacitors with useless consumer part numbers that do not track even with their parts list. So...H E L P !!!
Electronic mail is buyembythesack(AT)peoplepc(DOT)com. I know my vintage radio kinfolk who are as passionate about old radios as me will probably help me out of my delimma. You always do and for that I am grateful.

I have a Victor Models 128 & 224 six tube, three band A.C. Receiver . Is that the one. It's about 10 pages. E-mail me at ( bruttan2@gmail.com ) and I will send .
Bruce

Sincere thanks to ELIOT NESS on this forum for e-mailing me some excellent scans of what I needed. He saved the day for me. Also, I am grateful to Bruce for his offer to send me his
scan as well. See...what'd I tell you? Guys like us who are passionate about vintage radios
comprise a wonderful community.

I've been struggling for a week to make sense out of the blobs shown next to the capacitors
on a scan I picked up off the Internet. Now I can "get my hands dirty."

Thanks again Eliot.

My booklet has the replacement parts list , if you need it.
Bruce

I'll jump on the bandwagon. I'd like to request a scan as well. I've a Westinghouse that shares the same chassis. There is a young freind of mine that has a 128 and a decent scan and parts list would be greatly appreciated. He shares an interest in old radios ...would appreciate it and we definitely need new blood in our ranks .
So Bruce and/or Eliot
You can send it to capestir at yahoo.ca

Many thanks

Ken

I am waiting for parts to complete my 128 restoration thread.

With the 2 resistor boards I would definately say that this is not a restoration for someone new.

Hi Tarpawn
Info sent.
Bruce

Excellent Bruce....Just what I'm looking for.

Best regards

Ken

Hey Guys,

I'd like to revive this thread and get a clear copy of the schematics and parts list too. Thanks a lot.

Brett

Hi Brett
E-mail me at( bruttan2@gmail.com) and I will sent it.
Bruce

Thanks Bruce,


They're excellent. I can't wait to get going on this.


Brett

Having done one I can attest to the difficulty (in places) of the set and in the crappy quality of some online schematics.

For a six tube set it is an excellent receiver.

Spoke to soon, I'm unable to print these. I even tried to edit them in a photo program but they will not open in it.

Brett

Hi Brett
I just sent them to another member will see if his is ok I have not had anybody say they could not open any before. Then see if we can get tthem to you some other way.
Bruce