 
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
Michael Janis
|
Post subject: WESTON Model 785 Industrial Circuit Tester  Posted: May Sun 13, 2012 1:25 am |
|
Joined: Mar Sat 05, 2011 9:27 pm
Posts: 34
|
|
I am working on a WESTON Model 785 and am in need of the schematic diagram or manual. Can't find anything on the inernet so I am hopeful someone here can help.
Thanks
|
|
| Top |
|
 |
|
Dale Saukerson
|
Post subject: Re: WESTON Model 785 Industrial Circuit Tester Posted: May Sun 13, 2012 3:00 am |
|
Joined: Jan Thu 01, 1970 1:00 am
Posts: 6185
Location: Minneapolis, MN USA
|
|
I have the manual including schematic as a 4 meg PDF.
PM me with an email address I can send it to.
|
|
| Top |
|
|
|
Michael Janis
|
Post subject: Re: WESTON Model 785 Industrial Circuit Tester Posted: May Sun 13, 2012 9:34 pm |
|
Joined: Mar Sat 05, 2011 9:27 pm
Posts: 34
|
|
Thanks to Dale I now have a manual. I noticed on mine there is room for the 1.5V battery for the low ohm ranges, but to make the 15V (or close to it) for the higher range, there is a battery compartment that looks like it will accept 9 - 1.5V flashlite cells. It all looks original. The manual calls for a small 15v cell but in this one they used all 1.5V batteries. Is anyone familiar with this arrangement? It may now be a cheaper way to repower the instrument.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
|
|
