Hi Vince,<BR> DO you have an oscilloscope? You can check for a video signal at the detector(video). If there is no signal it could be the I.F. amps after the tuner. Could also be an AGC problem. If the set is not inter-carrier type, then sound would have been taken off before the video detector. Sound was normally removed at the first intermeadiate frequency stage. <BR>ED<P>------------------<BR>

vince<BR> please e-mail me a close up picture of the under chassis. i have a hunch something touching. i remember this tv but cant locate photo fact.<P> graveyard49@wideopenwest.com<P> rick<P>------------------<BR>