Antique Radio Forums
https://antiqueradios.com/forums/

photos of PHILCO 38-116 mounts for chassis
https://antiqueradios.com/forums/viewtopic.php?f=1&t=387823
Page 1 of 1

Author:  mg34.42 [ Nov Fri 27, 2020 2:51 am ]
Post subject:  photos of PHILCO 38-116 mounts for chassis

does any one have a photo of the chassis mounts for the philco 38-116 and does any one know if there was a back on this model

Attachments:
IMG_7474[2989].jpg
IMG_7474[2989].jpg [ 776.52 KiB | Viewed 576 times ]

Author:  egg [ Nov Fri 27, 2020 6:03 pm ]
Post subject:  Re: photos of PHILCO 38-116 mounts for chassis

Ed at Renovated Radios has lots of washers and grommets.
https://renovatedradios.com/

Attachments:
Philco-supports.png
Philco-supports.png [ 120.28 KiB | Viewed 496 times ]

Author:  wiscojim [ Nov Fri 27, 2020 6:28 pm ]
Post subject:  Re: photos of PHILCO 38-116 mounts for chassis

Your wood blocks are in the shipping lockdown position. You need to move them to the back edge of the shelf. The chassis will then slide in and out by lifting it up at the back. You can see where they mount by the dust pattern on your shelf (areas bounded by red lines).

Yes, the 38-116 did come with a back. Look here: http://www.tuberadioland.com/philco38-116XX_main.html

Attachment:
38-116 blocks.jpg
38-116 blocks.jpg [ 236.21 KiB | Viewed 486 times ]


.

Page 1 of 1 All times are UTC [ DST ]