Looking any info on this model. Got it for $7 and contrary to the post-it note it works fine. It's odd in that the phono section is tacked on the back of chassis almost as an after thought.
Attachments:
w113a_front.jpg [ 38.3 KiB | Viewed 498 times ]
w113a_bottom.jpg [ 36.22 KiB | Viewed 498 times ]
w113a_tubes.jpg [ 120.47 KiB | Viewed 498 times ]
_________________ Smoke me a Kipper, I'll be back for Breakfast.
Sorry, can't help with a schematic. As far as the phono preamp - - they probably kept it as far away from everything else to prevent hum/noise. When receivers/amps were designed for ceramic phono cartridges - which had about 1/2 volt output - the preamp stages weren't as critical as those designed for "modern" magnetic cartridges - whose output is only a few milivolts, thus subject to hum/noise.