Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives
Support This Site: Contributors :: Advertise


It is currently Jul Sat 20, 2019 6:48 pm


All times are UTC [ DST ]






Post New Topic Post Reply  [ 5 posts ] 
Author Message
 Post subject: WTB: Looking for a 21" Predicta CRT.
PostPosted: May Thu 23, 2019 12:40 pm 
Member

Joined: Apr Tue 07, 2015 5:03 pm
Posts: 81
Location: Brooklyn, NY
Greetings to the group,

I'm looking for a good CRT for a 21" Predicta Barber Pole / Holiday / Continental, etc. models. Will consider a junker set.

Any help would be greatly appreciated.

Thanks,

Ron, Brooklyn, NY


Top
 Profile  
 
 Post subject: Re: Looking for a 21" Predicta CRT.
PostPosted: May Thu 23, 2019 1:42 pm 
Member
User avatar

Joined: Feb Thu 17, 2011 11:27 pm
Posts: 12473
Location: Long Island, N.Y.
Did I respond previously to your request to get in touch with Vaughn Rudasill in Deer Park, LI? He's always helpful with parts. You might have to use a more common replacement which works fine, but the back plate must be either left off or modified to accommodate the slightly longer neck.
A good genuine 21" Philco Predicta replacement CRT is not going to come cheap.


Top
 Profile  
 
 Post subject: Re: Looking for a 21" Predicta CRT.
PostPosted: May Thu 23, 2019 10:04 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 219
Location: Mesquite, Texas USA
I have 21” CRTs. PM me.


Top
 Profile  
 
 Post subject: Re: Looking for a 21" Predicta CRT.
PostPosted: Jun Mon 17, 2019 7:49 pm 
Member

Joined: Apr Tue 07, 2015 5:03 pm
Posts: 81
Location: Brooklyn, NY
bump

Still Looking for this.

I'd defeinitely consider a parts set with a good CRT.

Thanks!

Ron, Brooklyn, NY


Top
 Profile  
 
 Post subject: Re: Looking for a 21" Predicta CRT.
PostPosted: Jun Mon 17, 2019 9:35 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 219
Location: Mesquite, Texas USA
I have a couple with barely visible phosphor burns. $200 each plus shipping. Both check good and perform well when connected to a good chassis. Shipping is extra. However, I could arrange for it to be dropped off at the ETF Museum in about a month. N/C for that.

A nos 21” is $400 & same deal on the shipping. I have a ton of Predicta parts.

Thanks for your interest.

Larry


Top
 Profile  
 
Post New Topic Post Reply  [ 5 posts ]  Moderator: Philco Fan

All times are UTC [ DST ]


Who is online

Users browsing this forum: edison64, ton10291 and 8 guests



Search for:
Jump to:  




























Privacy Policy :: Powered by phpBB