Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives
Support This Site: Contributors :: Advertise


It is currently Dec Fri 13, 2019 3:16 pm


All times are UTC [ DST ]





Post New Topic Post Reply  [ 5 posts ] 
Author Message
 Post subject: Meck XQ-776
PostPosted: Sep Tue 17, 2019 3:21 pm 
Member

Joined: Jun Thu 12, 2008 1:05 am
Posts: 107
Location: Detroit, michigan
Can anyone tell me if these are the right knobs for this set? If not anyone have a set to sell?
Also anyone near Michigan interested in the the set?


Attachments:
IMG_5583.JPG
IMG_5583.JPG [ 166.82 KiB | Viewed 510 times ]
Top
 Profile  
 
 Post subject: Re: Meck XQ-776
PostPosted: Sep Tue 17, 2019 4:39 pm 
Member
User avatar

Joined: Feb Thu 17, 2011 11:27 pm
Posts: 13223
Location: Long Island, N.Y.
At first it looked like someone put Motorola knobs on it, but after checking they do look correct! Good for you because they likely wouldn't be easy to find.
Very nice hard to find early post-war TV
This is not the same set, but it's good just to verify that Meck used those knobs around that time:


Attachments:
Meck_10inchTV.jpg
Meck_10inchTV.jpg [ 139.98 KiB | Viewed 494 times ]
Top
 Profile  
 
 Post subject: Re: Meck XQ-776
PostPosted: Sep Tue 17, 2019 10:41 pm 
Member
User avatar

Joined: Aug Thu 12, 2010 6:25 pm
Posts: 297
Location: Durham, NC
I somehow acquired a chassis for that model Meck. About the only thing I still have is the tuner. The escutcheon on yours looks like a continuous tuner is used, but the tuner I have is click-stop (I think). Unusual design, with tuning by variable capacitor - not what the SAMs schematic shows. I have a scan of the SAMS if you need it.
Nice to see how it looked in its original state! (Speaking of states, it was made in Indiana, where my wife grew up.)

_________________
Mark Nelson
A collector of TV signal boosters and UHF converters -- God help me!
tv-boxes.com


Top
 Profile  
 
 Post subject: Re: Meck XQ-776
PostPosted: Sep Wed 18, 2019 3:00 am 
Member

Joined: Jun Thu 12, 2008 1:05 am
Posts: 107
Location: Detroit, michigan
Anyone have a back for this set?


Top
 Profile  
 
 Post subject: Re: Meck XQ-776
PostPosted: Sep Wed 18, 2019 2:16 pm 
Member
User avatar

Joined: Feb Thu 17, 2011 11:27 pm
Posts: 13223
Location: Long Island, N.Y.
oldtvsandtoys wrote:
Anyone have a back for this set?

Good luck with that, but original backs are very hard to come by, although a few are (or were) being reproduced. On eBay you can find the same type of metal sheets and you can cut your own and grind the edges smooth. I did this on two Admirals and they came out great. On one I went a step further. I cut a hole where the neck of the CRT is and adhered a cup from a cheap cupcake tray, metal strips bordering the edge and washers where the screws goes in. You can then sandblast or paint it afterwards. It's not that difficult and they come out very convincing!
You can use thin quality fiberboard too and carefully drill a series of holes. You can put the CRT cup on them too to look more realistic.


Top
 Profile  
 
Post New Topic Post Reply  [ 5 posts ]  Moderators: 7jp4-guy, Mr. Detrola

All times are UTC [ DST ]


Who is online

Users browsing this forum: ken1, SIXMILLION DOLLARMAN and 4 guests



Search for:
Jump to:  




























Privacy Policy :: Powered by phpBB