Forums :: Resources :: Features :: Photo Gallery :: Vintage Radio Shows :: Archives
Support This Site: Contributors :: Advertise


It is currently Aug Sat 08, 2020 10:07 pm


All times are UTC [ DST ]





Post New Topic Post Reply  [ 5 posts ] 
Author Message
 Post subject: Plas T Pair Liquid ?
PostPosted: Jul Wed 12, 2017 4:20 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 37
Location: San Diego, CA
Is the PlasTPair liquid CA cyanoacrylate thin glue? I think it might be,anyone know for sure? Thanks


Top
 Profile  
 
 Post subject: Re: Plas T Pair Liquid ?
PostPosted: Jul Wed 12, 2017 5:48 pm 
Member

Joined: Jan Mon 16, 2012 4:15 pm
Posts: 6517
Location: Near Brandon, Iowa
Doesn't appear to be a CA or epoxy. The powder component is atomized plastic and the liquid component is a volatile solvent for the plastic. Mixing the two components dissolves the plastic in the solvent forming a paste and when the solvent evaporates, you are left with solid plastic. About the same concept as dry wood putty powder and probably has similar shrinkage issues.


Top
 Profile  
 
 Post subject: Re: Plas T Pair Liquid ?
PostPosted: Jul Wed 12, 2017 7:20 pm 
Member

Joined: Jun Thu 15, 2006 1:21 am
Posts: 3702
Location: NE Ohio
It is a solvent consisting of two parts. Can't find the sheet at this instant. Will try to find it and report later.

_________________
Bruce


Top
 Profile  
 
 Post subject: Re: Plas T Pair Liquid ?
PostPosted: Jul Wed 12, 2017 9:31 pm 
Member
User avatar

Joined: Jan Thu 01, 1970 1:00 am
Posts: 35437
Location: SoCal, 91387
OK, dug out mine. The information sheet reads;

CONTAINS
Solvent contains Methyl methacrylate (CAS 80-62-6) and N,N-Dimethylaniline (CAS 121-69-7).
Powder contains Poly ethyl Methacrylate/methyl acrylate (CAS26572-20-3, Ethyl acrylate (CAS 140-88-5) and Benzoyl peroxide (CAS 94-36-0).

_________________
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\He Who Dies With The Most Radios Wins/////////////////////////


Top
 Profile  
 
 Post subject: Re: Plas T Pair Liquid ?
PostPosted: Jul Sat 15, 2017 5:39 pm 
Member

Joined: Jan Thu 01, 1970 1:00 am
Posts: 3557
Location: Nr London, England, SS1 3PT
It is very good and works perfectly with Bakelite. Used it for more than a decade and it not only hangs in there but the temp. coef. must be similar 'cos when sprayed hair cracks don't appear later in the paint.

Gary


Top
 Profile  
 
Post New Topic Post Reply  [ 5 posts ]  Moderator: Peter

All times are UTC [ DST ]


Who is online

Users browsing this forum: processhead and 7 guests



Search for:
Jump to:  


































-->


Privacy Policy :: Powered by phpBB