I have a Philco 40-215 that originally would have had a small power indicating light assembly in the front of the cabinet. Mine is missing, anyone have one? Contact at comried123@msn.com,thank you

Have never found a loose one, so I made one by cutting a red bead in half. go to a bead store and see what they have, get several. The faceted ones are what you want. The original had a shaft attached to catch the light and bring it forward I think. Maybe you could super glue a plastic clear rod of appropriate diameter onto the back of a red bead thats cut in half.
If it works, make several and sell them on ebay or here.
Mark Oppat