|
Page 1 of 1
|
[ 6 posts ] |
|
Author |
Message |
sidevalvebob
|
Post subject: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Mon 11, 2019 4:28 pm |
|
Joined: May Thu 12, 2016 4:36 am Posts: 68 Location: Niagara Falls, Canada
|
Just picked up a Canadian Westinghouse Model W-559-A. I haven't been able to find any information have checked my RCC files as well as other sites but haven't found anything. I noticed it is quite similar to the Model W-552-B almost same cabinet just different where the grill is. The tube line up is the same as well 2A7,58,2B7,2A5,80. as well as the dial face and knobs. I have the schematics for the Model W-552-B Model however it is so blurry next to impossible to compare it to my wiring, capacitors and resistors. My guess because of the tubes it was made around 1939-1940. Any help would be greatly appreciated.
Thanks Sidevalvebob
|
|
Top |
|
 |
Bugman
|
Post subject: Re: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Mon 11, 2019 6:20 pm |
|
Joined: Mar Sat 14, 2009 5:56 pm Posts: 4440 Location: VA 22602
|
I see that tube line-up for a Canadian Westinghouse W-560A for 1939-40. Might that one be close enough?
_________________ I'm not a hoarder, I'm a caretaker of scarce commodities
|
|
Top |
|
 |
egg
|
Post subject: Re: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Mon 11, 2019 6:29 pm |
|
Member |
 |
Joined: Jan Tue 31, 2012 1:55 am Posts: 10396 Location: Mountains of Mourne. Ireland.
|
|
Top |
|
 |
sidevalvebob
|
Post subject: Re: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Mon 11, 2019 10:04 pm |
|
Joined: May Thu 12, 2016 4:36 am Posts: 68 Location: Niagara Falls, Canada
|
|
Top |
|
 |
Bugman
|
Post subject: Re: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Tue 12, 2019 12:26 am |
|
Joined: Mar Sat 14, 2009 5:56 pm Posts: 4440 Location: VA 22602
|
My Canadian radio resources jump from 558-A to 560-A. I have checked adjacent years with no success.
_________________ I'm not a hoarder, I'm a caretaker of scarce commodities
|
|
Top |
|
 |
sidevalvebob
|
Post subject: Re: Need info and Schematic for Canadian Westinghouse Radio Posted: Mar Wed 13, 2019 5:44 pm |
|
Joined: May Thu 12, 2016 4:36 am Posts: 68 Location: Niagara Falls, Canada
|
Thanks Bugman for further searching, my RCC Westinghouse files jump past Model 559-A as well. I'm in the process of removing chassis and comparing wiring diagrams. I used photoshop on the model 552-A schematic and increased image 10 percent at a time so as not to lose any pixalation. I can now read the model 522-A good enough to compare it to my model. However I'm still looking for the Westinghouse Model 559-A schematic.
Thanks Again Sidevalvebob
|
|
Top |
|
 |
|
Page 1 of 1
|
[ 6 posts ] |
Moderator: sofaslug |
|
|
|